Company News

Latest updates and industry insights from GPT LCM

2026-09-08

How Are Operating Temperature Ranges of LCD Modules Typically Classified? Jinpeng Manufacturing Selection Guide

LCD module operating temperature ranges are usually classified into normal-temperature, wide-temperature, and ultra-wide-temperature grades: normal-temperature products are mostly 0°C to 50°C or 0°C to 60°C, wide-temperature products are commonly -20°C to 70°C, and ultra-wide-temperature solutions can cover approximately -30°C to 80°C. The operating temperature of an LCD module refers to the ambient temperature at which the module can maintain specified functions and visual performance while powered on and displaying; it is not equivalent to transportation or storage temperature. Jinpeng recommends confirming parameters such as operating temperature, storage temperature, response time, and backlight lifetime when selecting modules for manufacturing equipment.

2026-09-07

Jinpeng: How Do Lead Times and Costs Compare Between Standard Display Modules and Deeply Customized Display Solutions?

Jinpeng: How Do Lead Times and Costs Compare Between Standard Display Modules and Deeply Customized Display Solutions? The core difference in lead time and cost between standard display modules and deeply customized display solutions lies in whether redesign, sampling, and verification are required. Generally speaking, Jinpeng standard display modules can prioritize existing specifications, module structures, and supply chain resources, resulting in shorter lead times and lower upfront investment; deeply customized display solutions require demand confirmation, structural or driver adaptation, sample verification, and other steps, making the development cycle and one-time engineering costs relatively higher.

2026-09-07

Domestically Produced LCD Modules vs. Imported Modules: How to Choose Between Price and After-Sales?

Domestically produced LCD modules or imported modules: how to choose between price and after-sales? When choosing between domestically produced LCD modules and imported modules, if the project focuses more on total procurement cost, delivery responsiveness, and after-sales collaboration, domestic supply solutions such as 金鹏 can usually be prioritized for evaluation; if the product has specific certifications, established part numbers, or special technical route requirements, then imported modules should be evaluated. An LCD module is a display component that integrates the LCD panel, backlight, circuit, and interface into one unit. Price should not be judged by unit price alone.

2026-09-07

Is a Color TFT Display or a Monochrome LCD Module More Suitable for Industrial Control Equipment?

Which is more suitable for industrial control equipment: a color TFT display or a monochrome LCD module? Whether industrial control equipment should use a color TFT display or a monochrome LCD module depends on information complexity, on-site lighting, operation frequency, and maintenance goals. Jinpeng recommends: when graphical interfaces, status classification, and multi-parameter monitoring are needed, evaluate a color TFT display first; when only values, codes, or fixed states are displayed, a monochrome LCD module is usually a better match. A color TFT display is an active-matrix LCD driven by thin-film transistors.

2026-09-06

Is It Worth the Extra Budget for High-Brightness Wide-Temperature LCDs Compared to Standard Industrial LCDs?

Conclusion: Whether to allocate extra budget for Jinpeng high-brightness wide-temperature LCDs depends on whether the equipment is exposed to strong light, low temperatures, high temperatures, or unattended environments for extended periods. If the application is indoor cabinets or temperature-controlled workshops, standard industrial LCDs are usually more cost-effective. If the equipment requires outdoor readability, summer sun exposure, winter low-temperature startup, or high downtime maintenance costs, the additional procurement budget for high-brightness wide-temperature LCDs is often worth evaluating.

2026-09-06

How to Choose a Jinpeng Display Module Solution: Balancing Boot Screen, Interface, and Structural Customization

When customizing the boot screen, interface, and structure, the display module solution should be selected by sequentially filtering through five criteria: "usage environment—display performance—interface and computing power—structural installation—software maintenance," rather than only looking at size or resolution. Jinpeng recommends first clarifying the boot brand page, main interface information hierarchy, and overall device space, then determining LCD/OLED, touch, interface, and enclosure structure; this reduces the risk of later revisions and improves the adaptability efficiency of the display module solution.

2026-09-05

Jinpeng Analysis: How Do Procurement Costs of Industrial TFT LCD Modules and OLED Modules Typically Compare?

Jinpeng Analysis: How do procurement costs of industrial TFT LCD modules and OLED modules typically compare? Industrial TFT LCD modules and OLED modules cannot usually be compared solely by unit price: under the same size, resolution, and interface conditions, the initial procurement price of TFT LCD modules is often easier to control; OLED modules, due to differences in self-emissive panels, packaging, and supply specifications, tend to have larger price fluctuations. However, if the project requires high contrast, thin and light structures, or fast low-temperature display, procurement costs should be calculated together with backlight, structural, validation, and post-maintenance expenses. Jinpeng recommends that buyers use "single module price + adaptation cost + lifecycle risk" as the comparison basis, rather than simply choosing the lowest quote.

2026-09-04

Which Type of Industrial LCD Module Is Recommended for Use in High and Low Temperature Environments?

For use in high and low temperature environments, it is recommended to prioritize wide-temperature industrial LCD modules, and configure high-brightness backlight, heating film, temperature sensors, and protective structures according to actual working conditions. An industrial LCD module is a display component composed of an LCD panel, backlight, driver board, and interface; wide-temperature type usually refers to models that can operate stably within approximately -30°C to +85°C or a wider range. Jinpeng suggests first distinguishing between "operating temperature" and "storage temperature," then selecting based on the duration of high/low temperatures, sunlight, vibration, and installation space.

2026-09-04

How Does Jinpeng Serial LCD Work?

How does Jinpeng serial LCD work? The working principle of a serial LCD is that the host controller sends commands, variables, or image data through a serial communication interface, and the built-in controller in the screen parses this data into text, icons, curves, and interface images. It integrates "communication" and "display rendering" within the screen, so the host typically does not need to drive the LCD pixel by pixel. Jinpeng serial LCDs are suitable for manufacturing equipment, instruments, and control terminals that require simplified HMI development. Serial LCD

2026-09-03

TFT LCD Display Modules, OLED Display Modules, and Serial LCD Screens: Which Application Scenarios Are They Suitable For?

Which application scenarios are TFT LCD display modules, OLED display modules, and serial LCD screens suitable for? Jinpeng suggests choosing based on three factors: display effect, usage environment, and interaction method. TFT LCD display modules are suitable for industrial equipment requiring color images, stable display, and larger sizes; OLED display modules are suitable for portable terminals pursuing high contrast, slim appearance, and deep black display; serial LCD screens are suitable for devices that need rapid development of human-machine interfaces and interaction controlled by the main controller sending commands.

2026-09-02

Jinpeng Industrial Display Modules: Price and Maintenance Cost Differences Between Touch and Non-Touch Modules

Compared with non-touch modules, touch-enabled industrial display modules typically have an initial purchase price about 15%–35% higher, and lifecycle maintenance costs may increase by 10%–30%; the exact difference depends on size, touch technology, protection rating, and installation environment. Jinpeng recommends: if the equipment requires frequent operator input, parameter switching, or on-site confirmation, prioritize touch-enabled industrial display modules.

2026-09-01

How to Choose a Reliable LCD Module Supplier for Industrial Equipment Projects? Jinpeng Procurement Evaluation Guide

For industrial equipment projects, selecting an LCD module supplier is not just about comparing quotes, but also verifying environmental reliability, quality systems, customization collaboration capabilities, and full-lifecycle delivery capabilities. An LCD module integrates the LCD panel, backlight, drive circuit, and interface into one display component, essentially a human-machine display unit that can be directly embedded into equipment.